HFHX 1ph 240vac 48v 20a High Frequency Battery Charger (Suitable for 110ah – 235ah Batteries)

£246.00 + VAT

Description

Suitable for use with all brands and makes of WET/Flooded Forklift Batteries

High Frequency Output – 48 volts 20 amps (20 amps DC High Frequency is approximately equivalent to a 35 amps DC conventional charger)

Input – 1ph (240vac) 13a minimum

Suitable for use with batteeried of a capacity of 110Ah – 235Ah @ 20hrAh (8hr-15hrs)

For example, this charger is suitable for use with the Trojan T105T125 – US220 232Ah – Crown CR220-CR235 batteries and many more

* Battery capacity range is given as a guide and is based on a battery in good condition. This charger will fully charge batteries of a larger capacity if put on charge before being fully discharged.

WALL MOUNTED OR ON-BOARD

The HFHX Series is ideal to be installed either on your wall as normal or onboard electrical vehicles thanks to its reduced dimensions.

PROTECTION DEGREE

All the HFHX Series chargers are IP65 rated.

This degree of protection allows the charger to be totally protected against dust, sand and in general any solid physical body of small dimensions.

Ideal to also be used in outside environments under a protective shelter.

BUMP RESISTANT

The super robust design is highly resistant to bumps.

The cooling fan is protected by the dedicated grid that avoids it from being damaged

Features

Connections
–  Single Phase 230 Vac +-10% / 50-60Hz
IP65 protection
Power Factor: ≥ 0,99
Efficiency: ≥ 94%
Noise: ≤45 dB
Long lasting cooling  fan
PCB completely covered by special resin
Ideal for many different industrial environments (high or low temperatures, lot of humidity, altitude,…)
Possibility to install additional accessories
High frequency resonant technology
Safety

Protection against overheating
Protection against reverse polarity
Protection against short circuit
Self-diagnostic in case of anomaly
Automatic interruption of the charging cycle when charge is completed
Active PFC
Soft-start when charge begins

Dimensions

200.7mm x 124.8mm x 101.8mm [+/-0.5mm]

View Diagram – 48V20A DIAGRAM